Home > Classroom Technology > Classrooms/Event Spaces > Hoover > Hoover 109
Hoover 109
Technology Instructions for Hoover 109. If you experience any problems, call ext. 3333 or email the Help Desk at helpdesk@etown.edu. Please visit our Web site at http://www.etown.edu/ITS for additional information.
Quick links to sections in this article:
Turning Off the Projector
Using the Podium Computer
Step 1:Touch the power button on the Crestron display.
Step 2:Touch Lectern PC.
Step 3:Press the power button located on the front of the computer and monitor, if not already on. Log on with your network username and password.Step 4:The computer screen image will appear on the projection screen.
Warning: Computer resets upon restart and shut down. Save your files to the network or removable media only.
Using the Document Camera
Step 1:As soon as you walk toward the AMX control panel, the screen will light up.Step 2:Touch Document Camera.
Step 3:Make sure that the Document Camera is on and in position. The power switch is on the left-hand side. The release is found at the bottom of the Camera arm.
Step 4:Use the buttons on the Document Camera to adjust the lighting and view of your objects.
Using a Laptop Computer
Note: It is recommended that you register your laptop on the college network to ensure better connectivity.
Step 1:Begin with the laptop turned OFF in order to connect.Step 2:Connect the HDMI cable to its port, the Ethernet cable to the network jack and the sound cable to the headphone jack on your laptop. The cables are found in the cable box on top of the podium.
Some classrooms also have a VGA cable.
Step 3:Touch the power button on the Crestron display.
Step 4:Touch Laptop HDMI.
Step 5:Turn on the laptop by pressing its power button. If you need power, plug your power adapter into the outlet in the cable box.Step 6:Press the Windows key + P and click Duplicate to make the projector display the same as your screen.
Using the Blu-Ray Player
Step 1:Touch Blu-Ray.
Step 2:Press the POWER button to the left of the disk drive.Step 3:Insert your disk.Step 4:Use the buttons on the touch screen to control the media. The volume buttons are located at the right side of the screen.
Using the Remote
Step 1:Turn on the remote with the power switch on the top left side.
Step 2:Use controls as desired.
Display Blank
Step 1:To blank a projector, touch Display Blank.
Step 2:Touch Display Blank again to re-enable the projector.
Using the Conference System
Step 1:
With Lectern PC selected, tap Control Selected Source.
Step 2:
Use the Up, Down, Left or Right buttons to move the camera and use either the preset zooms at the bottom or the Zoom In or Zoom out buttons to adjust the zoom.
Properly Turning Off the Projector
Step 1:Turn off the projector by touching the POWER button on the left sidebar. You will be prompted, “Are you sure you want to power off the system?” Touch YES.
Step 2:Turn the computer off by clicking on the START button at the bottom left of the screen, then select the SHUTDOWN option. Choose SHUTDOWN in the dialog box and click OK.Step 3:If you want to turn on the projector again, give the machine several minutes to cool down before restarting the projector.
Warning: Do NOT turn off the Surge Protector!
Make sure that the projector is turned OFF because it is very expensive to replace the bulb.
Author: karperc | Last Updated: 11/25/2020 1:05 PM | Page Views: 5113 |
https://helpdesk.etown.edu/helpconsole2012/kb/default.aspx?pageid=hoover_109
|