Home > Classroom Technology > Classrooms/Event Spaces > Hoover > Hoover 107, 112
Hoover 107, 112
Technology Instructions for Hoover 107 and 112. If you experience any problems, call ext. 3333 or email the Help Desk at mediaservices@etown.edu. Please visit our Web site at http://www.etown.edu/ITS for additional information.
Quick Links to sections in this article:
Using the Podium Computer
Step 1:Touch anywhere on the Control Panel to wake the screen.Step 2:Press Sources on the left side of the touch screen.Step 3:Press Lectern PC on the touch screen or on the right-hand side buttons, and the projector will automatically turn on.
Note: Wait a few moments for the projector to warm up.
 Step 4:If you follow the above steps and the computer still does not appear to be on, press the power button located on the front of the computer located in the lectern cabinet. Log on with your network username and password. (If you are a guest, please contact the department assistant for a username and password.)
 .Step 5:The computer image will appear on the projection screen.
Using the Document Camera
Step 1:Touch anywhere on the Crestron Control Panel to wake the screen.Step 2:Press Sources on the left side of the touch screen.Step 3:Press Document Camera on the touch screen or on the right-hand side buttons, and the projector will automatically turn on.
Note: Wait a few moments for the projector to warm up.
 Step 5:Raise the camera arm and direct the camera towards your document. If the doc cam does not power on automatically, the power button is located next to the screen on the base.
 Step 7:Use the detail, focus and zoom buttons on the Document Camera to adjust the view of your objects.
Using a Laptop Computer
Warning: You must register your laptop to use it on the college network.
Step 1:Connect the HDMI cord to the HDMI port on your laptop, and make sure your laptop is powered on. If your laptop needs to be plugged in, feel free to use the outlets located alongside the HDMI cord.
If your laptop has only a VGA port: Connect the VGA cable to the blue port and the sound cable to the headphone jack on your laptop.
 .Step 2:Connect the Ethernet cord to your laptop if you need a wired connection to the network. Whether you are using a wired or wireless internet connection, you will need to be registered on the network if you are not already. For further instructions on getting registered and connected to the network, click here.Step 3:Touch anywhere on the Crestron Control Panel to wake the screen.Step 4:Press Sources in the left side of the touch screen.Step 5:Press Laptop HDMI (or Laptop VGA if using a VGA connection) on the touch screen, and the projector will automatically turn on.
Note: Wait a few moments for the projector to warm up.
 Step 6:Press the Windows key + P and click Duplicate to make the projector display the same as your screen.
Properly Turning Off the Projector
Step 1:Turn off the projector by touching the POWER button on the left sidebar. You will be prompted, “Are you sure you want to power off the system?” Touch YES.
Step 2:Turn the computer off by clicking on the START button at the bottom left of the screen, then select the SHUTDOWN option. Choose SHUTDOWN in the dialog box and click OK.Step 3:If you want to turn on the projector again, give the machine several minutes to cool down before restarting the projector.
Warning: Do NOT turn off the Surge Protector!
Make sure that the projector is turned off when not in use to preserve the lifetime of the projector bulb.
| Author: mansfieldn | Last Updated: 11/17/2022 1:42 PM | Page Views: 1810 |
https://helpdesk.etown.edu/helpconsole2012/kb/default.aspx?pageid=hoover_107
|