BookmarkPrint
Contents
Home > Classroom Technology > Classrooms/Event Spaces > Steinman > Steinman 211


Steinman 211
Technology Instructions for Steinman 211. If you experience any problems, call ext. 3333 or e-mail the Help Desk at mediaservices@etown.edu. Please visit our Web site at http://www.etown.edu/ITS for additional information.
Quick Links to sections in this article:
Using the Podium Computer       Using a Laptop Computer       Using the VCR Player 
Using the Document Camera       Turning Off the Projector   

Steinman 211

Note: Point the remote control at the projector to turn it on. All remotes should be found on the table. You can use the projector remote to control the volume in the room.


Using the Podium Computer

Step 1: Press the Power (red) button on the projector remote to turn on the projector. 
Note: Wait for the projector to warm up. 
Power Button

Step 2:Press the Power button located on the back of the Macintosh computer if not already on. Log on with your network username and password. If you are a guest, please contact the department assistant for a username and password. Step 3:Press Input Select on the projector remote and the computer image will appear on the projection screen. 
Input Select

Warning: Computer resets upon restart and shut down. Save your files to the network or removable media only. 


Using a Laptop Computer
Note: It is recommended that you register your laptop on the college network to ensure better connectivity. 

Step 1:Begin with the laptop turned off to connect. Step 2:Connect the VGA cable to the blue port and Ethernet cable to the network jack on your laptop. The cables are under the table. If you are using a Macbook, you will need a video adapter. Step 3:Press the Power button on the projector remote to turn on the projector. 
Note: Wait a few minutes for the projector to warm up. 
Power Button

Step 4:Press Input Select on the projector remote until the laptop is connected. 
Input Select

Step 5:Turn on the laptop. If you need power, plug in your power adapter into a power outlet in the room. 
Using the VCR Player

Step 1:
Press the Power button on the projector remote to turn on the projector. 
Note: Wait for the projector to warm up. 
Power Button

Step 2:
Press the Power button on the black VCR player to turn it on. Step 3:You may use the remote in the room to control the VCR.  Step 4:Press the Input Select button on the projector remote to cycle to the correct input for the VCR.
Input Select

Step 5:A DVD can be played through the Macintosh computer. The portable drive is located next to the monitor of the computer.

Using the Document Camera

Step 1:Press Input Select on the projector remote until Document Camera appears on screen.
Input Select

Step 2:When you select doc cam, the projector will automatically turn on. 
Note: Wait for the projector to warm up. 
Step 3:Make sure the the document camera is on and in position. The power switch is on the left-hand side of the base. The release is found at the bottom of the camera arm.Step 4:Use the buttons on the document camera to adjust the lighting and view of your objects.  
Properly Turning Off the Projector

Step 1:Log off or shut down the computer by clicking the Apple icon in the top left corner of the screen. Step 2:Turn off the projector by clicking the Power button on the projector remote twice. You will be prompted by a message on the projection screen. 
Power Button

Step 3:If you want to turn on the projector again, give the machine several minutes to cool down before starting up again. 

Related Articles


helpdesk.etown.edu/helpconsole2012/kb/default.aspx?pageid=steinman_211