BookmarkPrint
Contents
Home > Classroom Technology > Classrooms/Event Spaces > Steinman > Steinman 204


Steinman 204
Technology Instructions for Steinman 204. If you experience any problems, call ext. 3333 or e-mail the Help Desk at mediaservices@etown.edu. Please visit our Web site at http://www.etown.edu/ITS for additional information.
Quick Links to sections in this article:
Using the Podium Computer       Using a Laptop Computer       Using the VCR/DVD Player 
Turning Off the Projector     

Steinman 204

Note: Point the remote control at the projector to turn it on. All remotes should be found on the table. You can use the projector remote to control the volume in the room.


Using the Podium Computer

Step 1: Press the Power (red) button on the projector remote to turn on the projector. 
Note: Wait for the projector to warm up. 
Power Button

Step 2:Press the Power button located on the back of the Macintosh computer if not already on. Log on with your network username and password. If you are a guest, please contact the department assistant for a username and password. Step 3:Press Computer on the projector remote and the computer image will appear on the projection screen. 
Computer Input

Warning: Computer resets upon restart and shut down. Save your files to the network or removable media only. 


Using a Laptop Computer
Note: It is recommended that you register your laptop on the college network to ensure better connectivity. 

Step 1:Begin with the laptop turned off to connect. Step 2:Connect the VGA cable to the blue port and Ethernet cable to the network jack on your laptop. The cables are located behind the Macintosh computer. 


Step 3:Press the Power button on the projector remote to turn on the projector. 
Note: Wait a few minutes for the projector to warm up. 
Power Button

Step 4:Press Auto Setup on the projector remote until the laptop is connected. 
Auto Setup

Step 5:Turn on the laptop. If you need power, plug in your power adapter into a power outlet in the room. 
Using the VCR/DVD Player

Step 1:Press the Power button on the projector remote to turn on the projector. 
Note: Wait for the projector to warm up. 
Power Button

Step 2:Press the Power button on the silver VCR/DVD player to turn it on. 
VCR/DVD Player Power Button

Step 3:Press the DVD or VHS button on the VCR/DVD player. Step 4:Press the Video Input button on the projector remote to cycle to the correct input for the VCR/DVD player. 
Video Input

Step 5:Use the buttons on the VCR/DVD remote when you are ready to play your media. Step 6:Use the VCR/DVD remote in order to control the VCR/DVD player.
Properly Turning Off the Projector


Step 1:Log off or shut down the computer by clicking the Apple icon in the top left corner of the screen. Step 2:Turn off the projector by clicking the Power button on the projector remote twice. You will be prompted by a message on the projection screen. 
Power Button

Step 3:If you want to turn on the projector again, give the machine several minutes to cool down before starting up again. 

Related Articles


helpdesk.etown.edu/helpconsole2012/kb/default.aspx?pageid=steinman_204