Home > Classroom Technology > Classrooms/Event Spaces > Esbenshade > Esbenshade 163, 164
Esbenshade 163, 164
Technology Instructions for Esbenshade 163 and 164. If you experience any problems, call ext. 3333 or e-mail the Help Desk at mediaservices@etown.edu. Please visit our Web site at http://www.etown.edu/ITS for additional information.
Quick Links to sections in this article:
Using the Podium Computer
Step 1:Press anywhere on the AMX Touch Panel to turn on the panel screen.Step 2:Push the 1st button for the COMPUTER. When you touch Computer, the projector will turn on automatically.
Note: Wait for the projector to warm up.
 Step 3:Press the power button located on the front of the computer and monitor if not already on. Log on with your network username and password.Step 4:The computer screen image will appear on the projection screen.
Warning: Computer resets upon restart and shut down. Save your files to the network or removable media only.
Using the Document Camera
Step 1:Press anywhere on the AMX Touch Panel to turn on the Panel screen.Step 2:Push DOC CAM. When you touch the Document Camera option, the projector will automatically turn on.
Note: Wait for the projector to warm up.
 Step 3:Make sure that the Document Camera is on and in position. The power switch is on the left-hand side. The release is found at the bottom of the Camera arm.
 Step 4:Use the buttons on the Document Camera to adjust the view of your objects.
Using a Laptop Computer
Note: It is recommended that you register your laptop on the college network to ensure better connectivity.
Step 1:Begin with the laptop turned OFF in order to connect.Step 2:Connect the VGA cable to the blue port, the Ethernet cable to the network jack, and the sound cable to the headphone jack on your laptop. The cables are found in the cable box on top of the podium.
 Step 3:Press anywhere on the AMX Touch Panel to turn on the panel screen.Step 4:Touch the LAPTOP button on the screen. When you touch the Laptop option, the projector will automatically turn on.
Note: Wait a few moments for the projector to warm up.
 Step 5:Turn on the laptop by pressing its power button. If you need power, plug your power adapter into the outlet in the cable box.Step 6:Press the appropriate keyboard combination to display the laptop image on the projection screen.
Note: All laptops have different settings that allow the two screens to match. Some common settings are provided below.
Using the VCR/DVD player
Step 1:Press anywhere on the AMX Touch Panel to turn on the panel screen.Step 2:Push DVD for playing DVDs or VCR for playing VHS tapes. When you touch one, the projector will automatically turn on.
Note: Wait for the projector to warm up.
 Step 3:Press the POWER button on the left of the silver VCR/DVD player if not already on.Step 4:Place either a DVD in the left side or a VHS tape in the right of the DVD/VCR player.Step 5:Use the buttons on the touch screen to control the media. The volume buttons are located at the right side of the screen.
Properly Turning Off the Projector
Step 1:Turn off the projector by touching the POWER button on the AMX Touch Screen. You will be prompted, “Are you sure you want to power off the system?” Touch YES.
 Step 2:Turn the computer off by clicking on the START button at the bottom left of the screen, then select the SHUTDOWN option. Choose SHUTDOWN in the dialog box and click OK.Step 3:If you want to turn on the projector again, give the machine several minutes to cool down before restarting the projector.
Warning: Do NOT turn off the Surge Protector!
Make sure that the projector is turned OFF because it is very expensive to replace the bulb.
Using the Sympodium
A Sympodium ID250 is available is E164. Click here for instructions on how to use the Sympodium, or the SMART podium monitor.
| Author: karperc | Last Updated: 6/5/2014 3:02 PM | Page Views: 1746 |
helpdesk.etown.edu/helpconsole2012/kb/default.aspx?pageid=esbenshade_163_164
|