Home > Etown Systems > Cable Television > Connect to Comcast - Cable Television
Connect to Comcast - Cable Television
Instructions for setting up cable access on your television.
Your TV must support a coaxial connection and have a QAM-enabled digital tuner.
Please check your owner's manual for specific instructions. In general, you'll follow these steps:
- Connect your TV to the wall jack using a coaxial cable; use the input connection on your TV labeled “Antenna,” “Cable In,” “CATV In,” “In,” or “RF In.”
- Plug the TV power cord into an outlet and turn the TV on.
- Press the “Home” or “Menu” button on your remote to access your TV's menu.
- Select “Setup” or “Settings.”
- Select “Channel.”
- Select “Auto Tuning” or “Auto Program.”
- Make sure you are scanning “Cable” or “DTV” signals NOT "antenna" or "air" channels.
- Select “Start” or "Run" and allow time for the scan to complete. This make take a few minutes as the TV searches for available channels.
After this process, your TV should display the channels using the channel up and channel down buttons on your remote.
| Author: careyt | Last Updated: 5/10/2016 10:44 AM | Page Views: 3487 |
helpdesk.etown.edu/helpconsole2012/KB/default.aspx?pageid=connect_to_comcast_cable
|